WELCOME TO CONSTRUCTION SITE SERVICES

click to enlarge
Located off I-24 Exit #11 in Paducah, Western Kentucky. You will exit north and go 2.3 miles to the first stop light which is Hwy 450 North. Go approximately 750 feet, go through the 4-way stop, go another 750 feet prox. and we're on the left at 3209 Cook Street, Paducah, KY. I am happy to be servicing the waterworks and sanitary sewer utilities once again. My personal experience goes back to 1977. Accumulatively, the experienced people at CSS have over 100 years of utility supply, management and contracting experience to share as a resource to each of you. Please call 866 or 270-443-1759 or fax 1789 or Hartford # 270-298-4545.

New Hartford, KY Facility - Nov. 2007

click to enlarge
We will be moving into our new Hartford,KY facility January '08. With over 11,000 square feet, it is located at 552 State Route 69 in the city limits of Hartford. Between Paducah and Hartford, we now have over 17,000 square feet under roof and approx. 2-acres of outside yard storage developed with potential of 2-acres more.

CSS warehouse

click to enlarge
Construction Site Services' 6,000 square foot warehouse with 16 ft. eaves. The warehouse is now completely insulated. We are awaiting the antenna mount that will allow you (and us) to use our cell phones inside the warehouse. Included in the warehouse is approx. 600 sq. feet of office space and two restrooms. By spring '06 we plan to fence the side lot. Most of the inventory will be stored inside and out of the weather.

Const. Site Svc's delivery cargo van

click to enlarge
This is the driver's side view of the '01 Ford delivery cargo van. Thanks to Scott Johnson of Johnson's Signs of Beaver Dam for their expert signage.

Construction Site Services cargo van

click to enlarge
The back view of the delivery/cargo van. We look forward to visiting your community soon.

CSS advertising

click to enlarge
side view of our warehouse. You see this from the John Puryear overpass (exit #11 off I24)

Master Meter's new DIALOG 3-G Drive By AMR meter

click to enlarge
CSS is a distributor for Master Meter. Pictured is their Dialog 3-G Drive By wireless water meter. This is the only water meter that has the RF transceiver completely enclosed under the glass. We recently tested this meter in the harsh environment of the wet meter pits that are so prevalent in Kentucky because of our clay soil and the vicinity of the rivers of our geographic area. Under 15" of water with a double cast iron lid on top, the meter gave a 77% signal which was plenty for the Drive-By receiver to read. It has data logging capabilities to let you know how each individual water meter is registering. It will warn you on above and below average uses. It will report negative flows and report that usage also! Please call 270-443-1759 for a consultation. We will be happy to demonstrate within your pit setting environments. Many of our AMR meter reading systems to date have not been acceptable under cast iron covers and or total water covered environments. We believe The Master Meter DIALOG 3-G Drive-By will answer the needs of our area.

24

click to enlarge
This is 24" Cast iron WPA water main from the late 1930's. This Paducah Water leak was on Lone Oak Road. On 5/15/06 It split the whole 18 foot length

FORD stock repair clamps - all stainless

click to enlarge
Various full-circle FORD METER BOX CO. all-stainless repair clamps

Matt Bachhuber with Eclipse

click to enlarge
shows the Kupferle/Eclipse automatic blow-off units for water utility systems dead-end lines and the #88 sampling station. CSS is pleased to be a distributor for Eclipse products of St. Louis, MO.

Special Order - 8 x 3 Ecc. Flanged Reducer

click to enlarge
This 8" x 3" Eccentric Flanged Reducer was for a project in Crittenden-Livingston County Water District pump station where the engineer specified a product that was not made with the cast iron foundries. Ford Meter Box Co. Pell City, AL plant fabricated this item especially for this job.

Special Order 8 x 2.5 Conc.Reducer

click to enlarge
This Concentric 8" 150# flange x 2-1/2" 300# flange was specified at Crittenden-Livingston County Water District, KY pump station by the engineer. It wasnot available from the casting foundries. This item was especially fabricated by The Ford Meter Box Company, Pell City, AL plant.

Mexico water meter box?

click to enlarge
This was taken on Jan. 29, 2006 outside the Playa Grande Resort in Cabo San Lucas, Mexico. It was a plush resort with all amenities. As we walked down the front drive, there beside the sidewalk was this open pit with five small 1/2x5/8 water meters. The dials were running like crazy. I'm really not sure what they fed. It couldn't have been the resort. I think the water meter name was something like "Cicaro". I failed to write it down.

Eclipse Automatic Flushing

click to enlarge
Units are now available at CSS. Matt Bachhuber of Kupferle/Eclipse, St. Louis, MO displays the various blow-offs and sampling station at our Warehouse on 6/1/06. We will be happy to build your custom automatic, just contact us.

Warehouse Inventory #1

click to enlarge
Various brass couplings, tees, ells, ball valves, nipples, spuds, etc. and we continue to build.

Warehouse Inventory #2

click to enlarge
Various Tools

Warehouse Inventory #3

click to enlarge
Various Tools and handpumps

Trace Wire Terminator

click to enlarge
CSS is marketing the Tracer Wire Terminator (TWT). This device is used around a valve box to terminate the trace wire. The ends are totally encapsulated which keeps the signal within the wire and not to the ground. CSS will be happy to forward upon request information regarding this patented device and its inventor who is from Paducah. CSS showed this device at the KWWOA (KY WATER & WASTEWATER OPERATORS ASSOC) annual conference in Owensboro, KY 3/20 and 3/21/06 and got some excellent feedback. CSS looks forward to marketing this in Kentucky and the surrounding area. Call 270-443-1759.

Check Valves - large flanged end

click to enlarge
CSS keeps in stock 4" and 6" Flanged end Check valves

Uniflange Adapters

click to enlarge
CSS has in stock UniFlange adapters to adapter plain end piping to a flat faced flange. We keep styles for standard PVC as well as C900-PVC. We also have flange adapters for ductile iron.

Gaskets for flanges plus hardware

click to enlarge
CSS stocks 2" thru 12" full-faced rubber and non-asbestos fibre flange gaskets along with the associated hardware.

Small dia. Repair clamp-special order

click to enlarge
This small diameter full-circle repair clamp is 24" long and fits 1" steel gas pipe. This was a special order item manufactured specifically for this project.

Valves - large MJ and flanged

click to enlarge
CSS now has in stock mechanical joint and flanged end gate valves in resilient seat.

Stock 11x18 meter vault heavy-wall

click to enlarge
CSS stocks the 11x18 black/white heavy wall meter vault.

Stock Heavy Wall 18"dia x 24"deep meter pits

click to enlarge
CSS stocks the Heavy Wall black/white 18" dia x 24"deep meter pits along with other sizes. Call for availability 270-443-1759

Stock Black/White meter box variety

click to enlarge
This is our full truckload upon arrival 3/9/06. CSS is very pleased to offer you a wide variety of the heavy-wall meter pits, vaults, and boxes with various lid/covers. Please call 270-443-1759 with your needs.

Stock meter boxes - Economy plastic

click to enlarge
Solid black plastic meter boxes 18" deep and 24" deep includes plastic lid w/Cast Iron Reader flap

Ductile iron rectangular box covers

click to enlarge
CSS stocks many rectangular ductile iron meter box covers that fit into the heavy-wall black/white boxes and vaults. These covers have reader lids and being ductile, they are half the weight of cast.

Rectangular cast iron meter box covers

click to enlarge
CSS Stocks a variety of cast iron rectangular meter box covers

Cast iron Cleanout Box

click to enlarge
CSS stocks this cleanout box which uses 4" pipe to telescope inside or it will sit on 6" pipe at the bottom flange. Water and Sewer lids are stocked and special order "Gas" lids are available

Paving Adapters - to raise valve boxes in blacktop

click to enlarge
CSS stocks 1", 1-1/2", 2", and 3" Paving adapters or sometimes called valve box risers. We also stock the RITEHITE valve box adapter which will adjust from about 2 1/2" up to 8".

Stock traffic cones & magnetic tape

click to enlarge
CSS Stocks 18" and 28" traffic cones and blue and green magnetic marking tape along with standard caution tape.

Stock paving adapters for valve boxes

click to enlarge
CSS Stocks various size paving adapters for roadway valve boxes. We stock 1", 1 1/2", 2" and 3" along with RiteHites.

Stock Meter reading tubes / Spy glasses w/brushes

click to enlarge
CSS stocks 24" and 36" meter reading tubes w/brushes

Stock

click to enlarge
CSS Stocks "SEWER" worded valve box lids along with our usual valve box items.

Stock Marking paint - inverted tip

click to enlarge
CSS Stocks inverted tip utility colors in BLUE, GREEN, and ORANGE in 17 oz cans along with the applicators.

Stock 2" operating nut wrenches

click to enlarge
CSS stocks in 4ft, 5ft, and 6ft. lengths

FORD Ultra wide range couplings

click to enlarge
CSS stocks FORD Ultra-Flex Wide-Range couplings 4" - 10". The FORD Ultra-Flex is a one-nominal size coupling. The gaskets range widely on the 4", 6", and 8" from SDR-35 (low side) up to AC/RB (high side). The 10" and 12" range from SDR-IPS (low side) up to AC/RB (high side). No changing of gaskets or end rings.... one coupling does it all.

Endot HDPE Tubing

click to enlarge
CSS stocks Endot EndoPoly Black and EndoPure Blue copper-tube size (CTS) HDPE tubing for water utility service lines.

Stock HDPE Tubing

click to enlarge
Water Service Tubing in CTS (copper-tube size) Cl200 (3408) Polyethelene 3/4", 1", 1 1/4", 1 1/2" and 2"

Stock Tool display

click to enlarge
Various tools on display

Stock locking device for settings

click to enlarge
This locking device works on the padlock wing of our FORD setters & valves. It will work with other manufacturers' as well.

VBHH72-7W-44-33G stock coppersetter

click to enlarge
CSS Stocks this FORD coppersetter, 5/8x3/4 meter size, ball valve inlet, dual-check outlet, 7" high, with 3/4"CTS-Grip Joint inlet and outlet connections

VB72-7W-41-33G Stock coppersetter

click to enlarge
CSS stocks this FORD coppersetter, 5/8x3/4 meter size, ball valve inlet, 7" high, with 3/4"CTS-Grip Joint inlet connection x 3/4"FIPT Dual-purpose union outlet connection

VBHH72-7W-41-33G stock coppersetter

click to enlarge
CSS stocks this FORD coppersetter, 5/8x3/4 meter size, ball valve inlet, dual-check outlet, 7" high, with 3/4"CTS-Grip Joint inlet connection x 3/4" FIPT Dual-purpose outlet connection

VBHH72-9W-47-33G Stock coppersetter

click to enlarge
CSS stocks this FORD coppersetter, 5/8x3/4 meter size, ball valve inlet, dual-check outlet, 9" high, with 3/4"CTS-Grip Joint inlet pipe connection x 3/4" PVC-Pack Joint outlet pipe connection

VB42-7W stock resetter

click to enlarge
CSS stocks this FORD resetter, 5/8x3/4 meter size bottom bar, 7" high, w/ball valve inlet and 5/8x3/4 meter size top spacing

2CVBHH FORD retrosetters

click to enlarge
This is a FORD RetroSetter #2CVBHH. It allows you to use an existing 5/8x3/4 setting, remove the existing water meter, install the retrosetter, reset the 5/8x3/4 meter. You now have a new ball valve and dual-check valve on the existing setting and only raised the meter approx. 3 1/2" in the box and offset approx. the same to the side.

F1000 FORD stock corporation stops

click to enlarge
We stock the Ford F1000 CTS corp. stop in both PackJoint and GripJoint style compression nuts in 3/4" and 1".

Resetter-2B

click to enlarge
CSS can special order many unusual items. Here is a Ford Meter Box tandem "Resetter-2B". It allows you to remove an existing 5/8x3/4 water meter, place the Resetter-2B in its place which then allows you to reset the 5/8x3/4 water meter with a pressure reducing valve in tandem (with minimal additional height), or in this case, the resetter was used to place two (2) different brands of water meters side by side (for monitoring purposes).

S70, S90, 202B, etc Stock Saddles

click to enlarge
CSS stocks a wide variety of water main service saddles 2" through 12" for IPS-SDR-PVC, C900-DR-PVC, Double-strap bronze for DI, AC, C900, and stainless back strap/iron body for DI, AC, C900.

FORD stock brass cplgs & adapters

click to enlarge
CSS stocks FORD METER BOX compression waterworks brass adapters in 3/4" and above - CTS (copper-tube size)both PackJoint and GripJoint, PVC Packjoint, Iron Pipe PackJoint, and PEP PackJoint.

FORD stock brass 2" adapters

click to enlarge
CSS stocks FORD brass compression 2" adapters for CTS and PVC.

FORD stock brass 3/4 Galv.IP compression

click to enlarge
This is a FORD #C85-33. It is a brass compression adapter one end for IP (such as galvanized x male pipe thread the other end. You tighten the compression end onto existing galvanized pipe then set the stainless screw shown above.

FORD stock brass elbows

click to enlarge
CSS stocks Ford brass compression ells.

FORD stock large 2" brass ball valves

click to enlarge
CSS stocks FORD B11-777 and B81-777 brass full-ported ball valves.

FORD stock brass ball valves

click to enlarge
This is FORD's 3/4"PVC-PackJoint one end x 3/4" FIPT the other end. This ball valve has a 5/8" port opening and the picture shown includes the lever handle. The PVC PackJoint is a compression nut assembly and should only be used on wall thicknesses of 3/4"Schedule 40 or 80.

Spill Prevention

click to enlarge
Please call 270-443-1759 or 866-443-1759 regarding our spill prevention products. We can provide you with Spill Prevention Kits specialized to your needs along with special made-to-order booms, pads, pillows, barge-booms, etc. for petroleum-collection needs and various chemical collection.

Inflow Protection dishes-salad bowls

click to enlarge
CSS stocks manhole inflow protection dishes, commonly called salad bowls or inserts. We can special order any size and can provide quickly.

Stock Fernco adapters

click to enlarge
CSS stocks FERNCO adapters for sanitary sewer & drainage applications.

Stock HyMax Couplings

click to enlarge
CSS is a full stocking distributor of the TPS HyMax couplings.

Stock brass nipples

click to enlarge
We stock red brass nipples in 3/4xclose (all-thread), 3/4x2, 3/4x3, 3/4x4, 3/4x6, 3/4x12, 1xclose, 1x3, 1x4, 1x6, 1-1/2x3, 1-1/2x6, 1-1/2x12, 2xclose, 2x3, 2x4, 2x6, and 2x12 along with various bronze threaded fittings in 3/4", 1" and 2" along with bushings and bell reducers. This line continues to grow so please contact us with your various needs.

Wheeler stock special deep socket sets

click to enlarge
CSS stocks a deep socket set sized for 1 1/4", 1 1/8", and 15/16".

Stock 18x24 Heavy Wall meter pits

click to enlarge
This heavy wall black/white meter well has a 20,000# GVW. It's shown here witht he FORD X32 18" dia. ring and lid.

Stock 18"x 24"deep corrugated pits

click to enlarge
This corrugated meter well is 18" diameter and is strictly used for non-weight bearing areas. It is shown here with a FORD X-32 cast iron ring and lid as its cover.

Stock - Heavy Wall plastic

click to enlarge
CSS (as of March'06) has black/white polyethelene heavy wall flare bottom meter boxes in 18" and 24" depths, black/white heavy wall vaults for 5/8x3/4, 1", 1 1/2" and 2" settings, and 15", 18", 24", 30" diameter round x 24" deep meter pits. Various styles and types of covers are available. (shown is the 11x18 MSBCF black white vault.

Stock CSS custom fittings

click to enlarge
CSS stocks pressure repair couplings in 2" through 8" and will be happy to special order larger sizes. We also stock sanded manhole adapters (left).

Stock - Silicone filled gauges

click to enlarge
CSS stocks liquid-filled (silicone as the liquid) stainless case pressure gauge, 0-200 PSI, 2 1/2"face, 1/4" lower mount. We will be happy to order all your gauge needs.

Stock probes, prybars, chisel points, manhole hook

click to enlarge
CSS is now stocking manhole hooks, mini pry bars, chisel pencil point and flat head digging bars, insulated and regular 48" tile probes with replacement tips.

Vendors Coming Soon...

click to enlarge
CSS has acquired Union Foundry, Crispin, and Midland Mfg. We will also be the western KY rep for SealGuard manhole rehab sealant along with HDPE manhole adjusting riser rings. We try to post pictures of our stock upon arrival. We are very pleased to offer these quality products to our utility customers

Kathy's Family Christmas 2005

click to enlarge
Daniel, Vivian (Kathy's Mom), Kathy, and Rachel

Kathy Wemhoener & Les Luttrell

click to enlarge
Christmas 2005 at Dundee, KY.